Make a saving on the ultimate baby feeding bundle including our RapidCool Kit and UV Steriliser. You’ll have all the tools you need to make a formula feed in just 2 minutes* and sterilise your little one’s bottles at the power of light – UV light, that’s just 3 minutes! That’s magic.
RapidCool is the most innovative way to make a formula feed to the perfect temperature, in just 2 minutes* and - following NHS guidelines too! As it's truly portable, making a feed on the go, has never been easier. Our RapidCool Kit comes with 2 RapidCool's and 1 insulated flask, so you can take your boiling water with you ready to make up the feed. Simply add water from the insulated flask and your pre-measured formula to the RapidCool and mix well, turning it upside down for at least 5 seconds.
Our UV Steriliser uses ultraviolet light to sterilise practically anything, in just 3 minutes! No water, no chemicals, no cooling or drying time - it's so simple. Just add your little one's bottles, toys and teethers, zip up the steriliser and press the button on the front to start the cycle.
For more information on how to use the RapidCool™ Kit click here, and click here for information on how to use the UV Steriliser.
Bundle Includes; 2 RapidCools and 2 Digital Lids, 1 Insulated Flask, 1 Standard Lid, 2 Milk Powder Dispensers and 1 UV Steriliser with metal tray.
WARNING: Adult use only. Inspect before each use and throw away at signs of damage or weakness. When making up a feed, follow the formula milk manufacturer's instructions. Do not use in microwave. Always allow RapidCool™ to reset before use and handling. Handle RapidCool™ carefully as the bottle base will heat up when in use. Please make sure that all items inside the steriliser are in direct contact with UV light. The UV light used by this device does not pass through dear or solid objects. Do not store UV Steriliser in direct sunlight or near a source of heat.
CLEANING: UV Steriliser - Wipe clean only. Air dry. Do not soak or submerge in liquid.
Important information included inside of product. Please read and retain for future reference.
WARRANTY: Nuby's RapidCool™ includes a one-year limited warranty against defects from the date of purchase. In the event of a malfunction or defect during the in-warranty period, Nuby™, at its discretion, will replace or repair the product under warranty. Upon receipt of the product and the proof of purchase with a valid date of purchase, the defective part will be repaired or replaced and returned to you free of charge. Please send Nuby the defective unit, proof of purchase with valid date of purchase, and a description of the problem you have encountered.
Is this BPA free?
Yes this product is BPA free.
How do I clean and sterilise the RapidCool™ lid?
The digital lid should be cleaned in warm, soapy water. After cleaning, the lid should be sterilised by UV sterilisation or cold-water sterilisation. The RapidCool™ lid must glow Nuby red when attached to the flask to indicate the water is at the correct temperature. Keep the flask upside down to make sure the water is in contact with the lid for at least 30 seconds, then the lid will be safe to use!
How do I sterilise the RapidCool™ base?
You can sterilise a RapidCool™ base via UV sterilisation, cold water sterilisation or steam sterilisation. Never steam sterilise in a microwave.
Can I mix formula with the boiled water immediately or do I have to wait for the water to cool down to 70°C?
No, you don’t have to wait! The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that the water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated!
How do I know when the RapidCool™ is ready to use again?
The RapidCool™ works by absorbing heat from hot liquids. After being exposed to heat, it will require a minimum of 3 hours before being ready to use again. The flask should feel cool to the touch.
How does RapidCool™ comply with NHS guidelines?
The NHS guidelines state that when preparing a bottle, you should use freshly boiled water, which has been left no longer than 30 minutes so that it remains at a temperature of at least 70°C. With RapidCool™, you pour freshly boiled water into the base along with your formula, but thanks to its patented technology the bottle cools the feed in 2 minutes*. Using freshly boiled water means that any harmful bacteria is killed and the RapidCool™ eliminates the need to run bottles under cold water or use an ice bath to get the feed to the right temperature.
How long can I leave the feed in the flask after preparing it?
We recommend that the feed is used immediately (as soon as the Nuby light turns green and indicates the feed has cooled sufficiently), as per the NHS guidelines.
How would this work for night feeds?
The RapidCool™ is quiet and quick, so you are not staying up longer than necessary, and no noisy machines or plugs are needed. There is also the option of keeping hot water to hand in an insulated flask, to save time boiling the kettle in the middle of the night!
How many feeds does it make at a time?
RapidCool™ makes one feed at a time as it needs cleaning and sterilising between uses. We have designed the RapidCool™ so that you have the flexibility of feed sizes between 90ml-240ml (3oz-8oz) as your baby grows. There are seven measurement markers located inside the flask between 60ml and 240ml.
How is it powered?
The lid is powered by a long-life lithium battery that does not require charging.
How long does the insulator flask stay hot?
The insulated flask will keep water above a safe temperature to make a feed for at least two hours, when pre-heated with boiling water first. The insulated flask works with the digital lid to show you with a red ‘Nuby’ that the water is still hot enough to kill any bacteria in your little one’s formula.
United Kingdom
United States