How to use your Nuby RapidCool: The complete guide
Now that you’ve got your RapidCool, you're probably eager to get started but might be wondering exactly how...
Read more
Make a saving with this perfect feeding duo. Our Rapid Cool™ Baby Bottle Maker and Portable UV Steriliser are a must-have for travelling with your new arrival. Save time and make bottles anywhere any time with the most innovative way of preparing formula feeds.
Our RapidCool™ Portable Bottle Maker is specifically designed to cool down your little one's formula feed to the perfect drinking temperature in just 2 minutes* whilst following NHS guidelines. Traveling with a newborn doesn't have to be daunting, the handy flask is fully portable, perfect for preparing bottle feeds on the go. Plus - it's small and compact, a perfect size to slip into your little one's changing bag.
We have paired this must-have flask with our Portable UV Steriliser so you can be fully prepared for your hungry one arriving. This handy on-the-go steriliser uses ultraviolet light to sterilise practically anything, in just 3 minutes! Simply add your little one's bottles, toys, and teethers, zip up the steriliser, and press the button on the front to start the cycle. The germs will be zapped away in no time.
For more information and instruction manual click here for RapidCool™ Baby Botte Maker and here for Portable UV Steriliser.
Bundle includes 1 RapidCool Baby Bottle Maker, 1 Milk Powder Dispenser and 1 Portable UV Steriliser Bag with an adjustable shoulder strap and rechargeable battery pack.
WARNING: Adult use only. Inspect before each use and throw away at signs of damage or weakness. When making up a feed, follow the formula milk manufacturer's instructions. Do not use in microwave. Always allow RapidCool™ to reset before use and handling. Handle RapidCool™ carefully as the bottle base will heat up when in use. Please make sure that all items inside the steriliser are in direct contact with UV light. The UV light used by this device does not pass through dear or solid objects. Do not store UV Steriliser in direct sunlight or near a source of heat.
CLEANING: Portable UV Steriliser - Wipe clean only. Air dry. Do not soak or submerge in liquid.
Important information included inside of product. Please read and retain for future reference.
WARRANTY: Nuby's RapidCool™ includes a one-year limited warranty against defects from the date of purchase. In the event of a malfunction or defect during the in-warranty period, Nuby™, at its discretion, will replace or repair the product under warranty. Upon receipt of the product and the proof of purchase with a valid date of purchase, the defective part will be repaired or replaced and returned to you free of charge. Please send Nuby the defective unit, proof of purchase with valid date of purchase, and a description of the problem you have encountered.
How do I clean and sterilise the RapidCool™ lid?
The digital lid should be cleaned in warm, soapy water. After cleaning, the lid should be sterilised by UV sterilisation or cold-water sterilisation. The RapidCool™ lid must glow Nuby red when attached to the flask to indicate the water is at the correct temperature. Keep the flask upside down to make sure the water is in contact with the lid for at least 30 seconds, then the lid will be safe to use!
How do I sterilise the RapidCool™ base?
You can do this via UV sterilisation, cold water sterilisation, steam sterilisation or in a dishwasher. Never steam sterilise in a microwave.
Can I mix formula with the boiled water immediately or do I have to wait for the water to cool down to 70°C?
No, you don’t have to wait! The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that the water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated!
How do I know when the RapidCool™ is ready to use again?
The RapidCool™ works by absorbing heat from hot liquids. After being exposed to heat, it will require a minimum of 3 hours before being ready to use again. The flask should feel cool to the touch.
How does RapidCool™ comply with NHS guidelines?
The NHS guidelines state that when preparing a bottle, you should use freshly boiled water, which has been left no longer than 30 minutes so that it remains at a temperature of at least 70°C. With RapidCool™, you pour freshly boiled water into the base along with your formula, but thanks to its patented technology the bottle cools the feed in 2 minutes*. Using freshly boiled water means that any harmful bacteria is killed and the RapidCool™ eliminates the need to run bottles under cold water or use an ice bath to get the feed to the right temperature.
For more information and instruction manual, click here.
Quiet for night-time feeds
Follows NHS guidelines
Touch screen with integrated thermometer
How it works
Step One
Step Two
Step Three
Step Four
Step Five
Step Six
RapidCool
Be ready to take on any feed with the Nuby RapidCool Baby Bottle Maker. The perfect formula feed, ready to serve wherever you are, in as little as 2 minutes....
Be ready to take on any feed with the Nuby RapidCool Baby Bottle Maker. The perfect formula feed, ready to serve wherever you are, in as little as 2 minutes.Our RapidCool acts as a cooling flask, perfect for on-the-go bottle prep; a must-have for parents with hungry little ones. This handy bottle cooler is perfectly portable with no filters or fuss and follows NHS formula feeding guidelines.
United Kingdom
United States