Changing bag with RapidCool™ Twin Pack Bundle

CARE INSTRUCTIONS: Change bag – hand wash only. Do not submerge in water. Air dry. Do not soak or bleach. Do not use fabric softeners or detergents. 

WARNING: Adult use only. Inspect before each use and throw away at signs of damage or weakness. When making up a feed, follow the formula milk manufacturer's instructions. Do not use in microwave. Always allow RapidCool to reset before use and handling. Handle RapidCool carefully as the bottle base will heat up when in use. Important information included inside of product. Please read and retain for future reference.

WARRANTY: Nuby's RapidCool includes a one-year limited warranty against defects from the date of purchase. In the event of a malfunction or defect during the in-warranty period, Nuby, at its discretion, will replace or repair the product under warranty. Upon receipt of the product and the proof of purchase with a valid date of purchase, the defective part will be repaired or replaced and returned to you free of charge. Please send Nuby the defective unit, proof of purchase with valid date of purchase, and a description of the problem you have encountered.

Is this BPA free?

Yes this product is BPA free.

How do I clean and sterilise the RapidCool lid?

The digital lid should be cleaned in warm, soapy water. After cleaning, the lid should be sterilised by UV sterilisation or cold-water sterilisation. The RapidCool lid must glow Nuby red when attached to the flask to indicate the water is at the correct temperature. Keep the RapidCool upside down to make sure the water is in contact with the lid for at least 30 seconds, then the lid will be safe to use.

How do I sterilise the RapidCool base?

You can sterilise a RapidCool base via UV sterilisation, cold water sterilisation or steam sterilisation. Never steam sterilise in a microwave.

Can I mix formula with the boiled water immediately or do I have to wait for the water to cool down to 70°C?

No, you don’t have to wait. The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated.

How do I know when the RapidCool is ready to use again?

The RapidCool works by absorbing heat from hot liquids. After being exposed to heat, it will require a minimum of 3 hours before being ready to use again. The flask should feel cool to the touch.

How does RapidCool comply with NHS guidelines?

The NHS guidelines state that when preparing a bottle, you should use freshly boiled water, which has been left no longer than 30 minutes so that it remains at a temperature of at least 70°C. With RapidCool, you pour freshly boiled water into the base along with your formula, but thanks to its patented technology the bottle will then cool the feed in 2 minutes*. Using freshly boiled water means that any harmful bacteria is killed and the RapidCool eliminates the need to run bottles under cold water or use an ice bath to get the feed to the right temperature.

How long can I leave the feed in the flask after preparing it?

We recommend that the feed is used immediately (as soon as the Nuby light turns green and indicates the feed has cooled sufficiently), as per the NHS guidelines.

How would this work for night feeds?

The RapidCool is quiet and quick, with no noisy machines or plugs needed. There is also the option of keeping hot water to hand in the kit's insulated flask, to save time boiling the kettle in the middle of the night.

How many feeds does it make at a time?

RapidCool makes one feed at a time as it needs cleaning and sterilising between uses. We have designed the RapidCool so that you have the flexibility of feed sizes between 90ml - 240ml (3oz - 8oz) as your baby grows. There are seven measurement markers located inside the flask between 60ml and 240ml.

Where should I store the RapidCool?

The RapidCool should be stored in a cool dark place, out of direct sunlight.

How is it powered?

The lid is powered by a long-life lithium battery that does not require charging.

How long does the insulator flask stay hot?

The insulated flask will keep water above a safe temperature to make a feed for at least two hours, when pre-heated with boiling water first. The insulated flask works with the digital lid to show you with a red ‘Nuby’ that the water is still hot enough to kill any bacteria in milk formula.